Info

Added: Sep 06, 2017 01:12
License: Creative Commons - Attribution - Non-Commercial - Share Alike

Description

Space: The Final Frontier
Explore the depths of the universe and challenge your relationships with your friends with Settlers in Space, a Catan-style board game.

Models Included

Bio (Resource)
H2O (Resource)
Core (Resource)
Foundry (Resource), produces Ti
O2 (Resource)
Space Pirate (Robber)
Black Hole (Center)
Space Links (Roads)
Outpost (Settlement)
Base (City)
Dice
Board Rim A
Board Rim B
Blank Tiles (for you to design your own pieces!)

PDFs Included

Resource Cards
Development Cards
--

Settlers in Space was printed on single-extruder printers with Palette+. Printed on a Series 1 Pro from Type A Machines.

Print Settings

Rafts:
No

Resolution:
Mostly 0.2mm (exceptions listed below)

Infill:
15%

Notes:
Printing Instructions
Note: File names include suggested colors and number of prints.

3D Prints

3x Bio (Resource)
3x H2O (Resource)
4x Core (Resource)
4x Foundry (Resource), produces 'Ti' (Titanium)
4x O2 (Resource)
1x Space Pirate (Robber)
1x Black Hole (Center)
15x Space Links (Roads) x 4 colors
5x Outpost (Settlement) x 4 colors
4x Base (City) x 4 colors
2x Dice
3x Board Rim A
3x Board Rim B
14 Suggested Filament Colors

Black
Brown
Light Brown
Dark Gray
Light Gray
Red
Pink
Orange
Yellow
Green
Translucent Green
Translucent Blue
White
Clear
Other 3D Prints

You can design your own pieces (e.g. resources, center piece) using the two Tile_BasePieceEmptyForYourDesign_* models.

Print Settings

File names show model grouping (e.g. 1of4), suggested colors, parts required
Most parts printed at 0.2mm with 3 top layers and 15% infill
5 parts require supports
BoardRim_A_1of2_Base_Black_UseSupports_x3
BoardRim_B_1of2_Base_Black_UseSupports_x3
Tile_Foundry_3of4_CrucibleAndBasins_DarkGray_UseSupports_x4
Tile_H2O_3of4_Pipes_Brown_UseSupports_x3
Tile_O2_2of4_Pipes_LightGray_UseSupports_x4
Print domes at 0.1mm with clear filament in vase mode
Tile_Bio_B_1of1_Dome_PrintSeparatelyInVaseModeAt0.1mm_Clear_x3
GamePiece_SpacePirate_Robber_PrintSeparatelyInVaseModeAt0.1mm_Clear_x1
Scaling
Most printed at 100% scaling
Black Hole (center piece) printed at 98% X- and Y-axes for fit
GamePieces_Numbers and/or GamePieces_TradingChips should work at 100% but may require scaling down a bit (~98%?) to fit in the holes. Depends on your printer!
No brims (or parts may overlap)
May require a file to smooth some edges (like for the BoardRim) for optimal fit

2D Printing

1x of Development Cards (.pdf)
6x of Resource Cards (.pdf)
Game rules
They're exactly like Catan!

Building Costs
1 Core + 1 Ti (from the Foundry) = 1 Space Link (Road)
1 Core + 1 Ti + 1 H2O + 1 O2 = 1 Outpost (Settlement)
2 H2O + 3 Bio = Base (City)
1 O2 + 1 H2O + 1 Bio = Development Card

Files

File name File size

Leave a Reply