• 3D Model


Added: Oct 07, 2017 05:57
Author: Sascha Goftari
License: Creative Commons - Attribution - Non-Commercial - Share Alike


New design is out. Compatibility with the multicolor upgrade is still not available
The new design should have no interference with your cable setup for the printer carriage. It also features the same design pattern as the rest of the printer.

The old design files are re-uploaded per request.

This is my custom made case for the Raspberry Pi computers for those that want to run a 3D print server like OctoPrint.

The case is mounted on the back side of the frame, just above the electronics with Z clearance in mind. The Z axis can hit the maximum level without any issues on neither the Z axis or the X carriage.

There is also a slot ready for using the Raspberry Pi camera if you want to monitor your prints.

Combined with a WiFi USB dongle this makes for a very portable printer!

Print Settings

Doesn't Matter



0,2 mm layer height works good. The design is optimized for a 0,4 mm nozzle.


Hardware requirements/installation
4x M3x16 screws for the case
2x M3x8 screws for attaching the case to the frame.

First install the Lid.stl onto the frame using the two M3x8 screws. Then attach the Base.stl/Base_rasp3_NoSpringSDSlot.stl to the lid using the four M3x16 screws.


File name File size
LICENSE.txt 22.02 KB
README.txt 2.84 KB
attribution_card.html 2.44 KB
files/Old_rasp2-3_lid_gpio.STL 370.88 KB
files/Old_rasp1_lid.STL 211.80 KB
files/Old_rasp2_base.STL 746.57 KB
files/Base_Rasp3_NoSpringSDSlot.STL 64.73 KB
files/Old_rasp3_base_NoSpringSD.STL 746.96 KB
files/Old_rasp1_lid_gpio.STL 220.69 KB
files/Base_Rasp2.STL 65.51 KB
files/Lid.STL 214.44 KB
files/Old_rasp1_base.STL 73.32 KB
files/Old_rasp2-3_lid_.STL 366.68 KB
images/8ce530bde2b01650e8a3d7c8fe51fe00_preview_featured.jpg 53.57 KB
images/6088e8d31b2d73dc580e4165ab233648_preview_featured.jpg 28.44 KB
images/b1cbfd332f2ed3bc84a715f5eec78201_preview_featured.jpg 42.95 KB
images/e28b49f6252de5219e31f6d9aa19d666_preview_featured.jpg 53.40 KB
images/87fcb187cbcecb330a486596bcf39a09_preview_featured.jpg 40.73 KB
images/c9f2b9c2b539cdd1f5fe12d6879f9ab4_preview_featured.jpg 40.58 KB
images/2bc029dd6da0783a97650b44e7a598fb_preview_featured.jpg 42.00 KB
images/b92ce92551e60a39a5d70a99e99c824d_preview_featured.jpg 40.52 KB
images/49e0e1f21888750a7489c179a6a544bd_preview_featured.jpg 41.54 KB
images/144eff1913f632c76bb26373f961b0c0_preview_featured.jpg 40.31 KB
images/a385a164a83b50a86dd72f54558a7bc3_preview_featured.jpg 42.19 KB
images/788c74e401448136a670613aafaa70b0_preview_featured.jpg 41.71 KB

Leave a Reply