• 3D Model

Info

Added: Feb 12, 2018 10:04
Author: Polytech
License: Creative Commons - Attribution

Description

This is a 100th iteration of the hex bit driver, I'm sure. I just had an application for a very slim one, and could not find one ready made

If you are going to modify it, you will need to get the OpenScad Knurled Surface Library v2 from here
https://www.thingiverse.com/thing:32122 Print Settings

Printer:

Panowin F1

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

40%

Notes:
This was printed with no bottom support (except for skirt to get things started) on BuildTak surface and heated bed. If you have a less reliable surface to print on, you're probably going to want to throw a brim around it before you print, because it's kinda tall and has a small bottom surface area. Otherwise I'll upload the pcode file that will work on either Trinus or a Panowin printer

Files

File name File size
LICENSE.txt 191.00 B
README.txt 2.27 KB
attribution_card.html 1.94 KB
files/knurly_ref.scad 171.00 B
files/knurly_small_hex.pcode 364.76 KB
files/knurly.stl 235.76 KB
images/5c8b7017bdeeb8ded8efb3aa16140784_preview_featured.jpg 58.68 KB
images/1c13ac67f4615630d9b454c4cfa8c857_preview_featured.jpg 40.52 KB

Leave a Reply