• 3D Model

Info

Added: Sep 02, 2017 03:00
Author: Greg HANKS
License: Creative Commons - Attribution

Description

This an accessory for the Creality CR-10 3D Printer.

The purpose of this bracket is to hold the wires for the heated bed in place to avoid that they wiggle when the bed move which would ultimately lead to breaking the welds or the wires.

The bracket is designed to be installed on the far left screw under the spring as shown on one of the picture. You will typically need to remove the glass bed for that.

The bracket does not touch the heated bed and can be safely printed in PLA. Reverse the cover upside down for printing.

Once the bracket is in place, move the wires a bit toward the bed (to avoid to put too much tension in them) and hold the wire in place with 2 zip ties.

Print Settings

Printer:
Creality CR-10

Rafts:
No

Supports:
No

Resolution:
200 ┬Ám

Infill:
20%

Files

File name File size
LICENSE.txt 19.23 KB
README.txt 2.31 KB
attribution_card.html 1.99 KB
files/Fusion_360_native_file_for_the_bracket.f3d 395.42 KB
files/CR-10_Y-Axis_wire_restrain_bracket_cover.stl 30.16 KB
files/CR-10_Y-Axis_wire_restrain_bracket.stl 286.90 KB
images/7c7d5921509c85760194ade4a1ca1e3b_preview_featured.jpg 100.95 KB
images/903f3bcc9da0e43356fcedfe30991180_preview_featured.jpg 29.11 KB
images/4e17a2f7bd149e79e8c5ae33d847f845_preview_featured.jpg 36.77 KB
images/e1ec67a3151b0aef4f7e0607883fb6f6_preview_featured.jpg 91.01 KB
images/b4d25639a289bdc8ffd580c12a5d3cea_preview_featured.jpg 94.92 KB

Leave a Reply