• 3D Model

Info

Added: Sep 03, 2017 03:04
Author: Greg HANKS
License: Creative Commons - Attribution

Description

This is a filament guide for the Creality CR-10 Printer.

Basically it will prevent your filament to touch the (greasy) Z-Axis lead screw.

There are 2 versions, one has clip where you can attach the wires from the hotend, the other doesn't.

To install the guide, you just have to clip it in place. If it does not fit, it means that you are the unlucky owner of a printer where the hole for the Z-Axis lead screw was not drilled at the right place (it seems to happen sometimes).

To use the guide, insert the filament in the axis of the extruder hole, as you would normally do, and once it is in place, put it in the hook of the guide.

Print Settings

Printer:
Creality CR-10

Rafts:
No

Supports:
No

Resolution:
200 ┬Ám

Infill:
15%

Files

File name File size
LICENSE.txt 19.20 KB
README.txt 2.24 KB
attribution_card.html 1.96 KB
files/Fusion_360_native_file_for_Filament_guide_v2.f3d 1.93 MB
files/CR-10_Filament_guide.stl 317.07 KB
files/CR-10_Filament_guide_with_hotend_wire_clip.stl 335.14 KB
images/739e44972c13941342129043d26c09a2_preview_featured.jpg 118.31 KB
images/71ebdce00a49fc35cb76b6a3cbe5aa3a_preview_featured.jpg 109.18 KB
images/8ef7cf9f467afb5893ad841db99ee8ff_preview_featured.jpg 79.75 KB
images/d18e9a25686d94b2c45a476664784d39_preview_featured.jpg 98.42 KB
images/0e0f2a858cc622676a934c0950094b67_preview_featured.jpg 40.42 KB
images/9c5a819c855f845aab7b8acb3a300cac_preview_featured.jpg 108.95 KB
images/1736924294ba4710f9808a1b3aeabbb9_preview_featured.jpg 38.92 KB

Leave a Reply