• 3D Model

Info

Added: Feb 22, 2018 07:59
Author: Robert Babb
License: Creative Commons - Attribution

Tags

Description

loaded crazycraig's remix of nihil's articulated shark into fusion360 and cleaned up the top face- removing the grooves that were in first and second segments

... 4 hours later- noticed one segment was not completely flat on the bottom, so fixed that.. ad while I was at it I made the sides on the segment that connects to the tail a little thicker so they will be less prone to breaking.

Print Settings

Printer:

Anet A2

Rafts:

No

Supports:

No

Resolution:

.2mm layer height

Infill:

8%

Notes:
sliced in simplify3d with both external and internal thin wall type set to perimeters only- with the other values for these two properties, the slicer was leaving gaps at the thinnest section of the joints.

Files

File name File size
LICENSE.txt 181.00 B
README.txt 2.19 KB
SOURCES.txt 93.00 B
attribution_card.html 1.93 KB
files/clean_flexi_shark_v2.stl 376.64 KB
images/40de21c7b94213a96d9540474707ccb7_preview_featured.jpeg 50.22 KB
images/50723e9711dfc7063db9528928345ce6_preview_featured.jpg 44.78 KB

Leave a Reply