• 3D Model

Info

Added: Mar 01, 2018 09:38
Author: Pratik Datta
License: Creative Commons - Attribution

Description

Print the chair frame and fabric separately in two separate colors.
You can then snap-fit the fabric onto the chair - Each of four corners of the fabric has a small dimple, which accepts a corresponding pin on the frame.

The chair frame has in built hinges, just remove it carefully after printing. There is sufficient clearance between the chair legs to prevent them from getting fused, but if they do you can gently pry them apart by hand.

The fabric also has in-built hinges, it will be little tight just after printing, but will become loose after you flex it.

The incline of chair is adjustable with 4 notches.

https://youtu.be/46bSah5JE5Q

I have attached the Fusion 360 files, in case anyone wants to remix this.

Print Settings

Printer Brand:

FlashForge

Printer:

Creator Pro

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

20%

Notes:
I used 3 solid outer layers to give it strength.

Files

File name File size
LICENSE.txt 193.00 B
README.txt 2.40 KB
attribution_card.html 1.95 KB
files/DeckChair-Fabric_v5.f3d 556.85 KB
files/DeckChair.stl 346.37 KB
files/ChairFabric.stl 1.64 MB
files/DeckChair_v8.f3d 509.53 KB
images/149cb7c9644f73f657ef1c337be4eef9_preview_featured.jpg 113.42 KB
images/ee737f6e83c320a97c62793d94e767be_preview_featured.jpg 46.84 KB
images/1cc69aad75f3e1d002dbf3919f74fedf_preview_featured.jpg 45.68 KB
images/a4c1c4ee9e9552551b8854bb5e9714ab_preview_featured.jpg 100.40 KB
images/e8861102ebb90103c7d2c860f97ce168_preview_featured.jpg 113.02 KB
images/77f6690e80c8eea0416cc202f44a73b7_preview_featured.jpg 181.60 KB

Leave a Reply